Welcome LABWARE DEALS LAB EQUIPMENT CO., INC
Drive Electronically controlled, pneumatic driven
Tidal Volume 0 ml -1500 ml
Configuration Trolley / Table-top ventilation
Gas Configuration O2, N2O
Flow Meter Four tubes [ 0.2 L/min ~ 10 L/min with interlock O2 valve ]
LCD Display 7 inch LCD
Graphic Display
Vaporizer (Maximum 2 mounts) Isoflurane/Enflurane/Sevoflurane/Halothane
Fresh Gas Compensation
I:E Range
Pressure Range
P trigger Range
Monitoring
Modes of Ventilation
Respiration range 1 bpm - 99 bpm (1 bpm - 40 bpm under SIMV)
Concentration Range 0 % – 5 % (Up to 8 % for Sevoflurane)
Calibration Automatic
Pipeline Input
O2 Flush 25L/min – 75 L/min
Minute Volume > 18 L/min
PEEP
Run-time
Waveforms
Hypoxic Safety System O2 > 21%
Alarm
Pressure Safety Valve < 6 kPa
Volume of CO2 absorber 0.8 L
Output Pressure
Power Consumption
Power Supply AC 220 V ± 10%, 50 Hz ± 2%
Battery
Current
Working Condition Operational temperature : 5°C ~ 40°C
Operational humidity : < 80 %
Dimensions 500 x 460 x 320 mm
Weight 22 Kgs
Drive Electronically controlled, bellow driven
Tidal Volume 0 ml – 1500 ml
Configuration
Gas Configuration O2, N2O
Flow Meter 1 l/min – 10 l/min
LCD Display 7 inch LCD
Graphic Display
Vaporizer Single [Isoflurane / Enflurane / Sevoflurane / Halothane]
Fresh Gas Compensation 25 l/min – 75 l/min
I:E Range 4:1-1:8
Pressure Range
P trigger Range
Monitoring VT, MV, BPM, Paw
Modes of Ventilation IPPV, SIMV, SIPPV, Manual
Respiration range 1 bpm – 100 bpm
Concentration Range 0% to 5%
Calibration Automatic
Pipeline Input
O2 Flush
Minute Volume
PEEP
Run-time
Waveforms Pressure-time, Flow-time, Pressure-volume loop
Hypoxic Safety System N2O cut-off valve / O2 > 25%
Alarm AC power failure, minute volume too high (low), airway pressure too high ( low ) and insufficiency of O2 and N2O
Pressure Safety Valve < 12.5 kPa
Volume of CO2 absorber 1.5 L
Output Pressure
Power Consumption 50 VA
Power Supply 100 VAC – 240 VAC, 50 / 60 Hz
Battery [Rechargeable Lead-acid battery]
30 minutes ~ 120 minutes
Current
Working Condition Patient airway pressure range: - 2 kPa ~ 10 kPa
Airway monitoring range: 0 ~ 9.9 kPa
Pressure limit range: 2.0 kPa ~ 6.0 kPa
Dimensions 1190 x 410 x 710 mm
Weight 82 Kgs
Drive Electronically controlled, pneumatic driven
Tidal Volume 20 ml – 1500 ml
Configuration
Gas Configuration O2, N2O
Flow Meter Cascade, 0 L/min -10 L/min
LCD Display 7 inch LCD
Graphic Display Waveforms of P-T, F-T
Vaporizer Isoflurane / Enflurane / Sevoflurane / Halothane
Fresh Gas Compensation
I:E Range 4:1-1:8
Pressure Range 5 mbar - 80 mbar
P trigger Range -20 cmH2O to 20 cmH2O
Monitoring
Modes of Ventilation
Respiration range 1 bpm - 99 bpm (1 bpm - 40 bpm under SIMV)
Concentration Range
Calibration Automatic
Pipeline Input 280 kPa - 600 kPa
O2 Flush
Minute Volume > 18 L/min
PEEP Off
3 - 20 cm H2O
Run-time > 30 minutes up to 2 hours
Waveforms
Hypoxic Safety System N2O cut-off valve / O2 > 25%
Alarm
Pressure Safety Valve < 12.5 k Pa
Volume of CO2 absorber 1.5 L
Output Pressure 0.4 ± 0.1 mPa
Power Consumption
Power Supply AC 220V ± 10%, 50Hz ± 2%
Battery Lead-acid battery 12V, 4Ah
Current 500 mA (Max)
Working Condition
Dimensions 700 x 850 x 1400 mm
Weight 65 Kgs
Drive Electronically controlled, pneumatic driven
Tidal Volume 0 ml ~ 1500 ml
Ventilation Modes A/C, IPPV, SIPPV, Manual
Gas Configuration O2, N2O
LCD Display LED display screen
Vaporizer Isoflurane / Enflurane
Medical Gas Pressure Range 0.32 mPa ~ 0.6 mPa
Air Pressure Range 0.32 mPa ~ 0.5 mPa
Maximum Safety Pressure ≤ 12.5 kPa
I:E Range 1:1.5 ~ 1:1.3
O2 Flush 25 L/min ~ 75 L/min
O2 Concentration > 21%
Respiration Rate 4 bpm ~ 40 bpm
Error Tolerance ≤ ± 4 %
O2 Flow meter 0.1 L/min ~ 10 L/min
N2O Flow meter 0.1 L/min ~ 10 L/min
Pressure Safety Valve <12.5 k Pa
Airway Pressure Alarm Lower limit 0.2 kPa ~ 5 kPa
Upper limit 0.3 kPa ~ 6 kPa
Tidal Volume Alarm Lower limit 0 ml ~ 1800 ml
Upper limit 50 ml ~ 2000 ml
Ventilation Volume Alarm Lower limit 0 L/ml ~ 12 L/ml
Upper limit > 18 L/ml
CO2 Absorber Soda lime tank
Storage: Ambient Temperature -15°C to 50°C
Storage: Relative Humidity < 95%
Storage: Atmospheric Pressure 86 kPa ~ 106 kPa
Power Supply 100 V ~ 120 V AC, 50/60 Hz
Dimension 830 x 770 x 1230 mm
Weight 75 Kgs
Ventilation Modes IPPV, PCV, SIMV + PS, PS and Manual
Tidal Volume 20 ml to 1500 ml
Pressure (Inspiratory) 5 cmH2O – 70 cmH2O
Pressure (Support) 3 cmH2O – 50 cmH2O
Electronic PEEP Off / 3 cmH2O – 30 cmH2O
I: E Ratio 4:1 to 1:8
Display 10.4” TFT Colour
Drive Pneumatically driven and electronically controlled
Pressure Trend Paw, Ppeak, Pplat, Pmean, PEEP
Volume Monitoring MV, VT, Freq
Graph Display P-T, F-T, P-V, F-V
Ventilation Gas (Optional CO2, AG, MAC) FiO2
Operational modes Closed, Semi-closed, Semi-open
Gas Supply O2 , Air, N2O
Ventilator Pressure at Inlet 280 kPa ~ 600 kPa
Flowmeter O2 : 0 ~ 10L/min
Air : 0 ~ 12L/min
N2O : 0 ~ 10L/min
Auxiliary O2 : 0 ~ 12L/min
Vaporizer Supports 2 vaporizers
CO2 Absorption Tank 3 L Autoclavable
Vaporizer Filling methods Pour Fill
Key Fill
Quick-Fil
Anaesthetic Agents Halothane, Enflurane, Isoflurane, Sevoflurane
APL Range Spontaneous breathing (SP) -70 cmH2O
T-slope 0 ~ 2s
Plateau (Inspiratory) Off / 5% – 60% Ti
Trigger Sensitivity 1 – 15 L/min
Alarm High/Low Airway Pressure, Sustained Airway Pressure, High/Low Minute Volume, High/Low FiO2, High Breath Rate, O2 supply failure, Power failure, Apnea alarm, Mute : 110s
Power Supply 100 V ~ 240 V 50/60 Hz
Battery 24 V 4Ah ; 120 min
Dimensions 760 × 1300 × 630mm
Weight 100 Kgs
X-Ray Generator Frequency 40 kHz
Power Capacity 3.5 kW
Tube Current X-ray : 20 mA - 63 mA
Fluoroscopy : 8 mA
Tube Voltage 40 kV ~ 110 kV
Exposure Factor 1 ~ 125 mAs
X-ray Tube Configuration Stationary anode with dual focus
Video Monitoring System Monitor : 14" High definition CRT with ±135° rotation
Vidicon Tube : 0.47 MP Ultra Low-Illumination CCD
Detector 9" Image Intensifier with micro-groove grid
X-ray Tube Thermal Capacity 650 kJ
Operation Interface Graphic LCD touch screen along with portable hand-held controller
Collimator Motorized multi-leaf collimator
Fluoroscopy Mode : Automatic  Tube voltage : 40 kV ~ 110 kV adjust automatically
Tube current: 0.3 mA ~ 4 mA adjust automatically
Fluoroscopy Mode : Manual Tube voltage 40 kV ~ 110 kV continuous
Tube current: 0.3 mA~4 mA continuous
Fluoroscopy Mode : Pulsed Tube voltage 40 kV ~ 110 kV continuous
Tube current: 4.1 mA~8 mA continuous
C-Arm Positioning Angles Forward and backward movement: 200m
Revolution around Horizontal axis: ± 180°
Revolution around Vertical axis: ± 15º Orbital Rotation: 120° (+90°~ -30°)
Focus Control Focus screen distance: 960 mm
Small focus: 0.6 and Large focus: 1.5
Plate Holder 8″ x 10″ / 10″ x 12″
Dimensions 2440 x 1100 x 1420 mm
Weight 353 Kgs
Power Consumption 350 W
Operating Frequency 330 kHz ─ 460 kHz
Modes 6 Monopolar modes
2 Bipolar modes
Monopolar Cut : Pure Cut 1 W ─ 350 W at 500 Ω load impedance
Monopolar Cut : Blend I 1 W ─ 250 W at 500 Ω load impedance
Monopolar Cut : Blend II 1 W ─ 150 W at 500 Ω load impedance
Monopolar Coag : Contact Coag
Monopolar Coag : Forced Coag
Monopolar Coagulation : Coag I 1 W ─ 120 W at 500 Ω load impedance
Monopolar Coagulation : Coag II 1 W ─ 100 W at 500 Ω load impedance
Monopolar Coagulation : Coag III 1 W ─ 50 W at 500 Ω load impedance
Bipolar Coag
Bipolar Cut
Bipolar I 1 W ─ 150 W at 100 Ω load impedance
Bipolar II 1 W ─ 100 W at 100 Ω load impedance
Memory Functions 10 Memory programs
Pressure Range 50 kPa ─ 106 kPa
Relative Humidity Range ≤ 80%
Operating Temperature 10 °C ─ 40 °C
Power Supply 220 V ─ 110 V 50/60 Hz
Dimensions 430 x 380 x 165 mm
Weight 7 Kgs
Power Consumption 300 W
Operating Frequency 416 kHz
Modes 5 Monopolar modes
2 Bipolar modes
Monopolar Cut : Pure Cut 1 W ─ 300 W at 800 Ω load impedance
Monopolar Cut : Blend I 1 W ─ 250 W at 800 Ω load impedance
Monopolar Cut : Blend II 1 W ─ 200 W at 800 Ω load impedance
Monopolar Coag : Contact Coag 1 W ─ 80 W at 800 Ω load impedance
Monopolar Coag : Forced Coag 1 W ─ 120 W at 800 Ω load impedance
Monopolar Coagulation : Coag I
Monopolar Coagulation : Coag II
Monopolar Coagulation : Coag III
Bipolar Coag 1 W ─ 50 W at 200 Ω load impedance
Bipolar Cut 1 W ─ 90 W at 200 Ω load impedance
Bipolar I
Bipolar II
Memory Functions
Pressure Range
Relative Humidity Range
Operating Temperature
Power Supply 220 V ± 22 V, 50 Hz ± 1 Hz (110 V±11 V, 60 Hz)
Dimensions 640 x 550 x 300 mm
Weight 16 Kgs